اپوکسیHBE-HT

HBE-HT

High Build Epoxy coating for High

Temperature operating pipelines

The Canusa HBE-HT is a state-of-the-art two component epoxy

coating system which has been specically formulated for high

temperature pipelines. Applied to bare steel, HBE-HT has

proven to withstand operating temperatures up to 150°C

(302°F) with exceptional performance. HBE-HT is used for

protection of pipeline

FIeld joint girth welds, valves and

FIttings, as a holiday repair material on FBE coated pipe or

for rehabilitation projects. This superior, 100% solids, novolac

epoxy system can either be spray applied or brush applied to

the intended substrate

High Temperature Corrosion Protection

HBE-HT coating system was designed to protect operating

pipelines up to 150°C with unrivaled performan.

Exceeds FBE Performance Requirements

HBE-HT exceeds FBE coating performance requirements

including impact resistance, hot water soak adhesion and

resistance to cathodic disbonding, as specified in USA (NACE

RP0394), British (CW6), and Canadian (CSA Z245.20) test

standards

State-of-the-Art Formulation

Epoxy Phenol Novolac technology combined with proprietary

amine cure chemistry allows the HBE-HT coating to maintain

adhesion stability after extended aging in hot water and hot

dry air.

High Build in Single Coat

A single pass application direct-to-metal will achieve a high

build coating thickness of 20-40 mils (500-1000 microns

Variety of Uses

 Mainline pipelines, rehabilitation projects, girth weld field joints

damage and holiday repair to FBE coated pipe, or pipeline

valves, fittings and bends