قیر : Bitumen

Bitumen : قیر Bitumen is primarily used to pave roads. It is a brown or black mixture of hydrocarbons, which is derived from petroleum. The consistency of bitumen varies from viscous to solid, and in its solid form, it is commonly known as asphalt . Iran OR Russ Payment LC, FOB and CIF

قیمت

قیت همکار / عمده فروشی :: استعلام قیمت

close

اطلاعات تامین کننده

بازرگانی البرز Alborz Trading International : تامین و صادر کننده مشتقات نفتی

تهران

عمده فروش، صادر کننده

سوخت ، مازوت صادراتی، گازوئیل و بنزین، قیر، اوره 46%، پلیمری، مواد شیمیای، سیمان، کائوچو RSS 20، 1675

مشاهده سایت فروشنده

تماس با تامین کننده

ثبت درخواست خرید

مشخصات

فروش به صورت: عمده فروشی
مدل: 70-60 ، 80-100
کشور سازنده: ایران

توضیحات محصول

Performance Grade (PG)

PG is the latest standard of the day. This relatively new method classified bitumen is based on varying temperatures. It is a fully scientific method studying the mechanical specifications of bitumen. In this method, a temperature range is defined for bitumen and the consumer can easily choose the desired product.

Having installed SHRP systems, Pasargad Oil Company is capable of selling bitumen to its customers based on PG method.

Today, a PG is defined for polymer modified bitumen and pure bitumen based on environmental conditions and temperature. A wider PG range means higher resistance and more favorable specifications. Pasargad Oil Company has the capacity to produce all these grades. This company first conducted climate zoning in Iran to specify the appropriate bitumen for different geographical zones.

PG Bitumen

High Temperature Performance	Low Temperature Performance
PG 46	-34, -40,-46
PG 52	-10, -16, -22, -28, -34,-40,-46
PG 58	-10, -16, -22, -28, -34, -40
PG 64	-10, -16, -22, -28, -34, -40
PG 70	-10, -16, -22, -28, -34, -40
PG 76	-10, -16, -22, -28, -34
PG 82	-10, -16, -22, -28, -34

· Viscosity Grade

Bitumen is graded based on absolute viscosity at 60 ºC or kinematic viscosity at 135 ºC. The SI physical unit of dynamic viscosity is Poise and kinematic viscosity is expressed in CentiStokes. Pure bitumen has been graded based on AASHTO-M226 and ASTM-D3381 standards.

Table 1-1: Technical Specifications of Pure Bitumen Based on Viscosity at 60 oC (AASHTO-M226)

	5/2 AC-	5 AC-	10 AC-	20 AC-	40AC-
Viscosity at 60 C	50±250	100±500	200±1000	400±2000	800±4000
Viscosity at 135 C	80	110	150	210	300
Penetration at 25 C, 100 grams, five seconds	200	120	70	40	20
	163	177	219	232	232
Solubility in trichloroethylene	0/99	0/99	0/99	0/99	0/99
Test on the residue of thin bitumen layer
Viscosity at 60 C	1000	2000	4000	8000	16000
Ductility at 25 C, 5cm/min	(1)100	100	50	20	10
Stain Test
Naphtha Solvent	Negative
Naphtha-Xylene Solvent, Xylene Percentage	Negative
Naphtha-Xylene Solvent, Xylene Percentage	Negative

Table 1-2: Technical Specifications of Pure Bitumen Based on Viscosity at 60 oC (AASHTO-M226)

Test	Viscosity
5/2 AC-	5 AC-	10 AC-	20 AC-	30AC-	40AC-
Viscosity at 60 C	50±250	100±500	200±1000	400±2000	600±3000	800±4000
Viscosity at 135 C	125	175	250	300	350	400
Penetration at 25 C, 100 grams, five seconds	220	140	80	60	50	40
Flash point, Cleveland open cup	163	177	219	232	232	232
Solubility in trichloroethylene	0/99	0/99	0/99	0/99	0/99	0/99
Test on the residue of thin bitumen layer
Heating loss	-	0/1	5/0	5/0	5/0	5/0
Viscosity at 60 C	1000	2000	4000	8000	12000	16000
Ductility at 25 C, 5cm/min	(1)100	100	75	50	40	25
Stain Test
Naphtha Solvent	Negative
Naphtha-Xylene Solvent, Xylene Percentage	Negative
Naphtha-Xylene Solvent, Xylene Percentage	Negative

Table 1-3: Technical Specifications of Pure Bitumen Based on Viscosity at 60 oC (AASHTO-M226)

Test	Viscosity
10AR-	20AR-	40AR-	80AR-	160AR-
Viscosity at 60 C	250±1000	500±2000	1000±4000	2000±8000	4000±16000
Viscosity at 135 C	140	200	275	400	550
Penetration at 25 C, 100 grams, five seconds	65	40	25	20	20
Penetration at 25 C, 100 grams, five seconds. minimum	-	40	45	50	52
Ductility at 25 C, 5cm/min	(2)100	(2)100	75	75	75
Test on Primary Bitumen
Flash point, Cleveland open cup	205	219	227	232	238
Solubility in trichloroethylene	0/99	0/99	0/99	0/99	0/99

Table 1-4: Technical Specifications of Pure Bitumen Based on Viscosity at 60 oC (AASHTO-M226)

Test	Viscosity
5/2AC-	5AC-	10AC-	20AC-	40AC-
Viscosity at 60 C	50 ±250	100 ±500	200 ±1000	400 ±2000	800 ±4000
Viscosity at 135 C	80	110	150	210	300
Penetration at 25 C, 100 grams, five seconds	200	120	70	40	20
Flash point, Cleveland open cup	163	177	219	232	232
Solubility in trichloroethylene	0/99	0/99	0/99	0/99	0/99
Test on Residue
Viscosity at 60 C	1250	2500	5000	10000	20000
Ductility at 25 C, 5cm/min	(1)100	100	50	20	10

Table 1-5: Technical Specifications of Pure Bitumen Based on Viscosity at 60 oC (AASHTO-M226)

Test	Viscosity
5/2AC-	5AC-	10AC-	20AC-	30AC-	40AC-
Viscosity at 60 C	50 ±250	100 ±500	200 ±1000	400 ±2000	600±3000	800 ±4000
Viscosity at 135 C	125	175	250	300	350	400
Penetration at 25 C, 100 grams, five seconds	220	140	80	60	50	40
Flash point, Cleveland open cup	163	177	219	232	232	232
Solubility in trichloroethylene	0/99	0/99	0/99	0/99	0/99	0/99
Test on the residue of thin bitumen layer
Viscosity at 60 C	1250	2500	5000	10000	15000	20000
Ductility at 25 C, 5cm/min	(1)100	100	75	50	20	10

Table 1-6: Technical Specifications of Pure Bitumen Based on Viscosity at 60 oC (AASHTO-M226)

Test on the residue of thin bitumen layer	Viscosity
1000AR-	2000AR-	4000AR-	8000AR-	16000AR-
Viscosity at 60 C	250 ±1000	500±2000	1000 ±4000	2000±8000	4000 ±16000
Viscosity at 135 C	140	200	275	400	550
Penetration at 25 C, 100 grams, five seconds	65	40	25	20	20
Penetration at 25 C, 100 grams, five seconds. minimum		40	45	50	52
Ductility at 25 C, 5cm/min	(1)100	(2)100	75	75	75
Test on residue
Flash point, Cleveland open cup	205	219	227	232	238
Solubility in trichloroethylene	0/99	0/99	0/99	0/99	0/99