Outdoor Fiber Optic Termination Box 48 Core Wall Mounted Enclosure Box For FTT
48Core fiber optica Splitter Distribution Box is widely used in the FTTH & FTTB application.. The cabinet is made of high reinforced cold-rolled steel material. The cabinet inner is designed in singal layer rolling panel inside, easy to control, space saving. This product is used for fixing the cable , welding , shunt and storage .it is an important part of FTTH & FTTB.
قیمت
- قیت همکار / عمده فروشی :
-
استعلام قیمتclose
- حداقل مقدار سفارش :
- 10 دستگاه
اطلاعات تامین کننده
مشخصات
- شرکت سازنده
- Genesis
- فروش به صورت
- خرده فروشی، عمده فروشی
- مدل
- Outdoor Fiber Optic Termination Box 48 Core
- کشور سازنده
- چین
توضیحات محصول
Outdoor Fiber Optic Termination Box 48 Core Wall Mounted Enclosure Box For FTTB
48Core fiber optica Splitter Distribution Box is widely used in the FTTH & FTTB application.. The cabinet is made of high reinforced cold-rolled steel material. The cabinet inner is designed in singal layer rolling panel inside, easy to control, space saving. This product is used for fixing the cable , welding , shunt and storage .it is an important part of FTTH & FTTB.
1. Features:
1. The box is made from high reinforced cold-rolled steel material with powder coated.
2. Water-proof design, sealed by super quality seals, effectively prevent the water penetration.
3. It can be opened for 120 degree, operable sapce is large.
4. Can be used for two 1x24 cores plc splitter.
5. Support OEM or ODM service.
2. Application:
1. FTTH
2. FTTO
3. Fiber to the desk
4. The new-building,extension and rebuilding of optical fiber cable project.
3.Technical Standard:
| No. | Test Item | Unit | Requirement | Test Result | Test Conclusion |
| 1 | Mechanical Strength Test of Box Surface | …… | Put 500N vertical pressure on every surface of the box for 15min; after unload, the box should not have depredation or permanent deformation | Conformance to Requirements | Pass |
| 2 | Mechanical Strength test of the door | …… | Open the door, put 100N vertical pressure on the outermost tip of the door for 15min; after unloading, the box should not have depredation or permanent deformation | Conformance to Requirements | Pass |
| 3 | Tightness test | …… | Nozzle diameter 6.3mm, 2.5m-3m away from the tested object, spray water in all directions to the shell, water flow rate: 2.5L/min±5%, duration of at least 3min, no water drop in the box | Conformance to Requirements | Pass |
| 4 | Low-temperature test | …… | Test temperature (-40±2)℃, duration of 2h; after the test, the box should not have depredation or permanent deformation | Conformance to Requirements | Pass |
| 5 | High-temperature test | …… | Test temperature (60±2) ℃, duration of 2h; after the test, the box should not have depredation or permanent deformation | Conformance to Requirements | Pass |
| 6 | UV Test | …… | Under exposure to 60 ℃ and normal temperature of 18w aging test UV light respectively for 8 hours, circulate for 5 times, no discoloration | Conformance to Requirements | Pass |
FAQ:
Q1:How to 100% guarantee the insertion loss of the adapters is below 0.1dB/0.2dB?
Firstly the quality of the sleeve , secondly the accurate size of housing,
then 100% inspection in the production is must.
Q2:Why some times too tight or loose when assemble the adapters to the plate?
There is tolerance of the thickness of the plate especially baking finished plate, you must make sure the gap distance is just match the plate thickness.
Q3:How to keep the clearance of the endface of the connectors?
Do not take off the dust cap in transportation and stocking, make sure not to touch the end face with hand. If found dirty or scratch under telescope, please clean it with alcohol.
Q4:What’s the warranty of ADTEK fiber optic patch cord?
We can ensure lifetime warranty as our fiber optic cable is UL approved and all our
fiber optic patch cords are 100% testing passed
Q5: Can we print our logo on the fiber cable jacket?
Yes, of course. You can decide the print on the fiber cable jacket. MOQ is 1KM when
you want to add your logo. No MOQ as neutral printing.
Q6: What is the insertion loss for singlemode?
It is ≤0.2dB (Typical ≤0.1dB)
Q7: Can you do the 3D (interferometer) test?
Yes, we have the interferometer in our factory, we usually do the test as customers
request. Our 30 test passing rate is over 90%.
PRODUCT QUALITY ASSUANCE:
To guarantee stable performance and provide the best products to users, our company has strict control on design,
raw material and process pursuing details and challenging perfection.
