How Water jet Cutters Work

Wide Range of Materials

The Water-Jet can work with a wide variety of materials, ranging from metals to non metal such as ceramics, composites, glass-even marble and granite.

Quality Finish

The finish provided by the water Jet Machine is a smooth sandblasted finish. No rough edges, burrs or jagged ends.

No Heat in Machining Process

Because the abrasive jet uses water and abrasive, the material is not heated up significantly during the cutting process. This makes the Water Jet Machine ideal for materials that are affected or deformed by heat, such as titanium.

Environment friendly

The Water Jet Machine uses water and garnet to cut. Garnet is an inert gemstone, which can be disposed of in the municipal waste stream. No toxic fumes are produced during machining.

No tool changing

You don't need to change cutting tools with the Water Jet Machining. One nozzle is used to machine all the different types of materials and shapes, saving time and the expense of multiple cutting tools.

Minimal burr

Using the abrasive jet, there is little or no burr in most materials.

Quick to program

The Water Jet Machine comes complete with a comprehensive CAD program (called Layout). You can draw parts from scratch in Layout, or import standard   files created in other programs.

Fast set-up and programming

'Make' is the other main program provided as part of the DARDI Jet Machine.'Make' takes the tool path created by Layout and calculates the exact position and cutting speed of the nozzle at a resolution of over 2,000 points per inch (800 points/cm). All you do is specify the material and thickness and 'Make' does the rest.

Complement Existing Tools, Used for either Primary or Secondary Operations

The Water Jet Machine can also work with your other machine tools to take advantage of the unique capabilities of each. An example of this is roughing out nested parts on the water jet to maximize material usage, and then performing final machining on a mill or machining center.

Reduce setup times

Little or no side force on the material being machined reduces the need to complex fixtures and greatly speeds setup times.