رله بریرمدل MTL4531

توضیحات محصول

The MTL4531 repeats a signal from a vibration sensor in a hazardous area, providing an output for a monitoring system in the safe area. The interface is compatible with 3-wire eddy-current probes and accelerometers or 2-wire current sensors; the selection is made by a switch on the side of the module

Number of channels: One

Sensor type: 2- or 3-wire vibration transducer

Location of signal source: Zone 0, IIC, T4–6 hazardous area if suitably certified Div. 1, Group A hazardous location

Hazardous-area input Input :impedance (terminals 2 & 3): 10kΩ Transducer supply voltage, 3-wire (terminals 3 & 1

Supply voltage :20 to 35V dc

Maximum current consumption :(10mA transducer load) 65mA at 24V

Maximum power dissipation within unit :1.33W

Safety description :Terminals 3 to 1 Uo=26.6V Io=94mA Po=0.66W Um = 253V rms or dc Terminals 3 to 2 Non-energy-storing apparatus ≤1.5V, ≤0.1A and ≤25mW

:SIL capable

These models have been assessed for use in IEC 61508 functional safety applications. SIL1 capable for a single device (HFT=0) SIL2 capable for multiple devices in safety redundant configuration (HFT=1) See data on MTL web site and refer to the safety manual.