عملگر برقی Multi turn AVA01
عملگربرقی قابلیت کنترل به طور آنالوگ یا از طریق fieldbus جهت open & closeیا کنترل PID عملگرهای برقی دارای Back up Battery جهت ذخیره آخرین اطلاعات موقعیت شیرها می باشد. از مزایای قابل توجه محصولات این شرکت داشتن گارانتی، خدمات تأمین لوازم یدکی ، نصب و راه اندازی وخدمات پس از فروش توسط شرکت تدبیر سازان سیال می باشد و کلیه مدارک نصب و راه اندازی ،عملگرها که بصورت کتابچه فارسی تهیه گردیده است.
مشخصات
- شرکت سازنده :
- GREATORK
- فروش به صورت :
- خرده فروشی، عمده فروشی
- مدل :
- AVA01
- کشور سازنده :
- چین
- عملگر برقی GREATORK :
- عملگر برقی شیرآلات صنعتی
توضیحات محصول
Greatork Actuator On-Off Range Specification(AVA)
- With 1 valve position sensor, 4 indicator relays, torque sensor, the user can set up the stroke end and torque.
- Current rating for switches: 5A-250V. AC/5 A-30V DC.
- Torque switch shall be graduated directly in rated torque percentage; it is easy and precise to set up the open degree.
- Drive Motor Suitable for 3P 400V±10%.50Hz±5%.combined variation±10%AC power supply.
H Class insulated. One Nos Thermoswitches embedded of stator winding for protection against burnout.
Duty rating as follows:
S2 15 min. suitable for 60 starts/stops per hr.
- Handwheel for emergency manual operation, which automatically disengages as soon as motor power operation resumes.
- High-definition liquid crystal position indicator for local indication as percentage of full travel.
- Valve position feedback: 4-20mA directly output current
- The motor include protection against single phasing or incorrect phase rotation and protection against overheating by a thermostat in the motor winding.
- The actuator have an integral motor starter, local control and lamp indication and has phase discrimination function.
- Three Cable Glands with adaptor can be: power cable (ISO M25 x 1.5), control cable (ISO M20 x 1.5), and remote signal cable (ISO M20 x 1.5).
- Painting: See Main Process of Static Plastic Spraying documents
- Suitable for ambient temperature for -30℃ to 70℃
- Enclosure of Actuator: IP68
- The actuator terminal box is double sealed such that when the terminal box cover is removed, the remaining electrical components are still protected by the watertight enclosure.
- Padlockabel Remote/Stop/Local selector switch.
- All switches & motor connections are internally wired & brought out to a common screw type terminal.
- The actuator have Controls with the following:
- Input command signals(potential free): OPEN-STOP-CLOSE with 24V DC
- Monitor relay (output signal) for collective fault signal ( potential free)
- Remote /Local fault annunciation
- Programmable Control Logic
- Reversing contactors (Electrically and mechanically interlocked)