آلایمنت لیزری Fixturlaser Go Basic

توضیحات محصول

 آلایمنت لیزری  Fixturlaser Go Basic

– عدم محدودیت قطر شفت

– فاصله مجاز بین سنسورهای اندازه گیری تا طول 5 متر

– دتکتور منحصر به فرد به طول 30 میلیمتر

– استفاده از خط لیزر به جای نقطه لیزر

– نمایش لحظه ای وضعیت ماشین در طول آلایمنت

– قابلیت آلایمنت کردن شفت های افقی و عمودی

– قابلیت بررسی لقی پایه ها به صورت اتواتیک

– عدم نیاز به انجام Pre Alignment

– امکان اعمال ناهمراستایی عمدی

– امکان مدیریت فایل ها و تهیه گزارش

توضیحات محصول

FIXTURLASER GO BASIC – COMPLETE SYSTEM

Weight (incl. all standard parts)

5,0  kg (11,0 lbs)

Storage Temperature

-20 to 70°C (-4 to 158°F)

Case

Material

High Impact ABS Plastic

Environmental protection:

Dust, water (5m/16 feet), and air tight with air pressure compensation valve

Drop Test:

3 m (10 feet) on to concrete floor

Dimensions

415 mm x 325 mm x 180 mm (16 in x 13 in x 7 in)

Display Unit

Housing Material

High impact ABS plastic and TPE rubber

Operating Temp:

-10 to 60°C ( 14 to 140°F)

Storage Temp:

-20 to 70°C (-4 to 158°F)

Relative Humidity:

10 – 90%

Weight

0,66 kg (1,46 lbs) with batteries

Dimensions

205 mm x 116 mm x 56 mm (8.1 in x 4.6 in x 2.2 in)

Environmental Protection:

IP 54

Flash storage memory

500 Mb

Display size

4” (102 mm) diagonal (84 x 56 mm)

Interface

Membrane Switch Keyboard

Peripherals

2 RS-485, 1 USB slave port

Power supply:

3 x 1,5V LR-14 (C) Alkaline batteries or 1,2V NiMH HR-14 Rechargeable Nickel Metal Hybride cells

Operating Time:

30 hours typical use

LED Indicators

Green/Red

Sensor Units

Housing Material

Anodized aluminum and high impact ABS plastic molded over with TPE rubber

Operating Temp

-10 to 60°C   (14 to 140°F)

Relative Humidity

10 – 90%

Weight

170 g (6,0 oz)

Dimensions

79 mm x 77 mm x 34 mm (3,4 in x 3,0 in x 1,3 in)

Environmental Protection:

IP 65 (Dust tight and protected against water jets)

Laser

650 nm class II diode laser

Laser Line Fan Angle

6°

Laser line width (1/e2):

1,6 mm

Laser line divergence (full angle):

0.25 mrad

Laser Power:

< 1 mW

Measurement distance:

Up to 5 m

Detector

CCD

Detector length:

30 mm (1.2 in)

Detector angular sub tense

30 mrad/m (3 mm/100 mm per meter)

Detector resolution:

1 µm

Measurement accuracy

0.3% ± 7 µm

LED Indicators:

Laser transmission and status indicators

Inclinometer resolution

0.1°

Inclinometer accuracy:

±0.5°

Ambient light protection:

Optical filtering and ambient light signal rejection

Shaft brackets

Fixture

V-fixture with non-twisting chain, width 20 mm (0,79 in)

Material

Anodized aluminum

Shaft diameter

Ø 25-175 mm (1”-6.9”)

Ø 25-450 mm (1”-18”) (with extension chains)

Rods

4 pcs 150 mm (5.9 in)