سنسور لیزری IFM O5D100

توضیحات محصول

هارمونیک کنترل نماینده فروش IFM

هارمونیک کنترل فروش سنسور IFM O5D100

هارمونیک کنترل فروش سنسور نوری IFM O5D100

هارمونیک کنترل سنسور لیزری IFM O5D100

O5DLCPKG/US

• Very long range due to time-of-flight measurement
• Reliable background suppression and colour-independent detection
• With display and pushbuttons for precise switch point setting
• Oblique angle to the object possible
• Reliable detection of glossy surfaces

• Product characteristics
  Type of light	red light
  Measuring range [m]	0.03...2
  Communication interface	IO-Link
  Laser protection class	2
  Housing	rectangular
  Dimensions [mm]	56 x 18.2 x 46.8
  Application
  Special feature	Background suppression
  Electrical data
  Operating voltage [V]	10...30 DC; ("supply class 2" to cULus)
  Current consumption [mA]	75; (24 V)
  Protection class	III
  Reverse polarity protection	yes
  Type of light	red light
  Wave length [nm]	650
  Typ. lifetime [h]	50000
  Inputs / outputs
  Number of inputs and outputs	Number of digital outputs: 2
  Outputs
  Total number of outputs	2
  Electrical design	PNP
  Number of digital outputs	2
  Output function	normally open / normally closed; (complementary)
  Max. current load per output [mA]	100
  Switching frequency DC [Hz]	11
  Short-circuit protection	yes
  Type of short-circuit protection	pulsed
  Overload protection	yes
  Detection zone
  Max. light spot diameter [mm]	5
  Light spot dimensions refer to	2 m
  Detection range hysteresis [%]	< 2.5
  Note on monitoring range hysteresis	black 6% remission
  Background suppression available	yes
  Background suppression [m]	< 20
  Measuring/setting range
  Measuring range [m]	0.03...2
  Sampling rate [Hz]	33
  Interfaces
  Communication interface	IO-Link
  Transmission type	COM2 (38,4 kBaud)
  IO-Link revision	1.1
  SDCI standard	IEC 61131-9
  Profiles	Smart Sensor: Sensor Identification; Binary Data Channel; Process Value; Sensor Diagnosis
  SIO mode	yes
  Process data analogue	1
  Process data binary	1
  Min. process cycle time [ms]	6.6
  Supported DeviceIDs	Type of operation DeviceID Default 372
  Operating conditions
  Ambient temperature [°C]	-25...60
  Note on ambient temperature	at ta < -10 °C warm-up is necessary, laser is off
  Protection	IP 65; IP 67
  Max. immunity to extraneous light [klx]	10; (on the object)
  Tests / approvals
  EMC	EN 60947-5-2
  Laser protection class	2
  Notes on laser protection	Caution: laser light Power: <= 4,0 mW Wave length: 650 nm pulse: 1,3 ns Do not stare into beam. Avoid exposure to the laser light. laser class: 2 EN / IEC60825-1:2007 EN / IEC60825-1:2014 Complies with 21 CFR 1040 except for deviations pursuant to Laser Notice No. 50, dated June 2007.
  MTTF [years]	151
  Mechanical data
  Weight [g]	85.5
  Housing	rectangular
  Dimensions [mm]	56 x 18.2 x 46.8
  Materials	housing: PA; bezel: stainless steel; operator interface: TPU; lens: PMMA
  Lens alignment	side lens
  Displays / operating elements
  Display	switching status LED, yellow switching output PIN 4 operation LED, green display alphanumeric display, 3-digit
  Display unit	cm
  Remarks
  Pack quantity	1 pcs.
  Electrical connection
  Connection	Connector: 1 x M12
  Diagrams and graphs
  hysteresis graph	x: distance [mm] y: Hysteresis [mm] 1 = background black 6% remission 2 = background white 90% remission
  Other data
  Accuracy
  Accuracy distance black (6 % remission) white (90 % remission) 0 mm ± 15 mm ± 15 mm 500 mm ± 15 mm ± 15 mm 1000 mm ± 15 mm ± 15 mm 1500 mm ± 20 mm ± 20 mm 2000 mm ± 30 mm ± 20 mm
  Extraneous light on the object < 10 klx
  ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — O5D100-04 — 25.02.2016 —