سنسور NCB50-FP-A2-P1

توضیحات محصول

PEPPERL FUCHS NCB50-FP-A2-P1

Inductive sensor NCB50-FP-A2-P1

• 50 mm flush
• 4-wire DC

• General specifications
  Switching function	complementary
  Output type	PNP
  Rated operating distance	50 mm
  Installation	flush
  Output polarity	DC
  Assured operating distance	0 ... 40.5 mm
  Reduction factor rAl	0.38
  Reduction factor rCu	0.35
  Reduction factor r304	0.83
  Nominal ratings
  Operating voltage	10 ... 60 V DC
  Switching frequency	0 ... 80 Hz
  Hysteresis	typ. 3 %
  Reverse polarity protection	reverse polarity protected
  Short-circuit protection	pulsing
  Voltage drop	≤ 3 V
  Operating current	0 ... 200 mA
  Off-state current	0 ... 0.5 mA
  No-load supply current	≤ 20 mA
  Operating voltage indicator	LED, green
  Switching state indicator	LED, yellow
  Functional safety related parameters
  MTTFd	670 a
  Mission Time (TM)	20 a
  Diagnostic Coverage (DC)	0 %
  Approvals and certificates
  UL approval	cULus Listed, General Purpose
  CSA approval	cCSAus Listed, General Purpose
  CCC approval	Certified by China Compulsory Certification (CCC)
  Ambient conditions
  Ambient temperature	-25 ... 70 °C (-13 ... 158 °F)
  Mechanical specifications
  Connection type	screw terminals
  Information for connection	A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 %
  Core cross-section	up to 2.5 mm2
  	Minimum core cross-section	without wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2
  	Maximum core cross-section	without wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2
  Housing material	PBT
  Sensing face	PBT
  Degree of protection	IP68
  Mass	445 g