رله Crouzet Eih 120 Vac

توضیحات محصول

Supply voltage Un 24 VDC / 24 VAC / 48 VAC / 120 VAC / 220 VAC
Voltage supply tolerance -15 % / +15 % limited to -15 % / +10 % if products are mounted without space between them
Operating range 0.85 →1.15 Un
Power consumption at Un 3 VA AC 1 W DC
Immunity from micro power cuts 10 ms
Inputs and measuring circuit
Frequency of measured signal 40 →500 Hz
Threshold adjustment 10 →100 % of the measureme

Adjustable hysteresis 5 →50 % of the displayed threshold
Display precision ± 10 %
Repetition accuracy with constant parameters ± 0.1 %
Measuring error with voltage drift ± 0,1 % (± 10 % Un)
Measuring error with temperature drift ± 0,02 %

Timing
Delays on power up (Ti) 0.1 s →20 s ± 10 %
Delay on thresold crossing Tt 0.1 s →3 s ± 10 %
Repetition accuracy with constant parameters ± 0.1 %
Reset time 500 ms
Delay on pick-up 500 ms

Output
Type of output 1 changeover AgNi, 8A AC max
Type of contacts No cadmium
Maximum breaking voltage 250 V AC/DC
Max. breaking current 8 AAC max.
Min. breaking current 100 mA AC/DC
Electrical life (number of operations) AC 12 : 2000 VA - 105
AC 15 : Cos φ = 0,3 - 6 000
DC 13 : L/R = 300 ms - 6 000
Breaking capacity (V resistive) 2000 VA AC
Maximum rate 360 operations/hour at full load

Insulation
Insulation coordination (IEC/EN 60664-1) Overvoltage category III : degree of pollution 2
Rated impulse withstand voltage (IEC/EN 60664-1) 4 KV (1,2 / 50 μs)
Dielectric strength (IEC/EN 60664-1) 2,5 KV AC 50 Hz 1 min.
Insulation resistance (IEC/EN 60664-1) > 100 MΩ / 500 VDC

General characteristics
Display power supply Green LED
Display relay Yellow LED
Casing 22,5 mm
Mounting On 35 mm symmetrical DIN rail, IEC/EN 60715
Mounting position All positions
Material : enclosure plastic type VO to UL94 standard Enclosure plastic type VO to UL94 standard
Protection (IEC/EN 60529) Terminal block : IP 20
Casing : IP 50
Weight 140 g