انکودر DFS60B-S1PL10000

توضیحات محصول

• PERFORMANCE

  Pulses per revolution	10,000 1)
  Measuring step	90° / electronically/number of lines
  Measuring step deviation at non binary number of lines	± 0.01°
  Error limits	± 0.05°

• ELECTRICAL DATA

  Electrical interface	4.5 V ... 32 V, TTL/HTL programmable
  Initialisation time after power on	32 ms 1) 30 ms
  Connection type	Cable, 8-wire, universal, 3 m
  Power consumption max. without load	0.7 W (without load)
  Load current max.	≤ 30 mA
  Maximum output frequency	600 kHz
  Reference signal, number	1
  Reference signal, position	90°, electric, logically gated with A and B
  Reverse polarity protection	✔
  Short-circuit protection of the outputs	✔ 2) 3)
  MTTFd: mean time to dangerous failure	300 years (EN ISO 13849-1) 4)

  • 1) With mechanical zero pulse width.
  • 2) Programming TTL with ≥ 5,5 V: short-circuit opposite to another channel or GND permissable for maximum 30 s.
  • 3) Programming HTL or TTL with < 5,5 V: short-circuit opposite to another channel, US or GND permissable for maximum 30 s.
  • 4) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40°C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.

• MECHANICAL DATA

  Mechanical interface	Solid shaft, Servo flange
  Shaft diameter	6 mm x 10 mm
  Mass	0.3 kg
  Flange material	Aluminum
  Housing material	Aluminum die cast
  Start up torque	0.5 Ncm (+20 °C)
  Operating torque	0.3 Ncm (+20 °C)
  Permissible shaft loading radial/axial	80 N (radial) 40 N (axial)
  Maximum operating speed	9,000 /min 1)
  Moment of inertia of the rotor	6.2 gcm²
  Bearing lifetime	3.6 x 10^10 revolutions
  Max. angular acceleration	≤ 500,000 rad/s²

  • 1) Self warming of 3.3 K per 1000 revolutions/min when applying note working temperature range.

• AMBIENT DATA

  EMC	According to EN 61000-6-2 and EN 61000-6-3
  Enclosure rating	IP 67, housing side (according to IEC 60529) IP 65, shaft side (according to IEC 60529)
  Permissible relative humidity	90 % (condensation of the optical scanning not permitted)
  Working temperature range	–40 °C ... +100 °C 1) –30 °C ... +100 °C 2)
  Storage temperature range	–40 °C ... +100 °C, without package
  Resistance to shocks	70 g (according to EN 60068-2-27)
  Resistance to vibration	30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)