دستگاه فیزره Olympus Omni scan
فروش انواع محصولات کمپانی Olympus دستگاه های فیزره Omni scan MX2 و Epooch1000 به همراه کلیه تجهیزات.ساخت کشور آمریکا برای کسب اطلاعات بیشتر لطفاً تماس بگیرید یا از طریق سایت پیغام بگذارید.
مشخصات
- مارک :
- المپیوس
- ساخت :
- امریکا
- مدل :
- omini scan MX2
توضیحات محصول
OmniScan MX2 Mainframe Specifications
Overall dimensions: 325 mm x 235 mm x 130 mm
(W x H x D): (12.8 in. x 9.3 in. x 5.1 in.)
Weight: 5 kg (11 lb), including module and one battery
Data Storage
Storage devices: SDHC card, most standard USB storage devices,or fast Ethernet
Data file size: 300 MB
I/O Ports
USB ports: 3
Speaker out: Yes
Video output: Video out (SVGA)
Ethernet: 10/100 Mbps
I/O Lines
Encoder: 2-axis encoder line (quadrature, up, down, or clock/direction)
Digital input: 4 digital TTL inputs, 5 V
Digital output: 4 digital TTL outputs, 5 V, 15 mA
Acquisition on/off switch: Remote acquisition enabled TTL, 5 V
Power output line: 5 V, 500 mA power output line (short-circuit protected)
Alarms: 3 TTL, 5 V, 15 mA
Analog output: 2 analog outputs (12 bits) ±5 V in 10 kΩ
Pace input: 5 V TTL pace input
Display
Display size: 26.4 cm (10.4 in.) (diagonal)
Resolution: 800 pixels x 600 pixels
Brightness: 700 cd/m2
Number of colors: 16 million
Type: TFT LCD
Power Supply
Battery type: Smart Li-ion battery
Number of batteries: 1 or 2 (battery chamber accommodates two hot-swappable batteries)
Battery life: Minimum 6 hours with two batteries
Environmental Specifications
Operating temperature range: 0 °C to 45 °C; 0 °C to 35 ºC with 32:128 PA (32 ºF to 113 ºF; 32 ºF to 95 ºF with 32:128 PA)
Storage temperature range: –20 °C to 60 °C (–4 ºF to 140 ºF) with batteries
–20 °C to 70 °C (–4 ºF to 158 ºF) without batteries
Relative humidity: 0% to 85% noncondensing
No air intake; designed for IP66
Shockproof rating: Drop-tested according to MIL-STD-810G 516.6
Phased Array Module Specifications (Applies to OMNI-M-PA32128)
Overall dimensions: 244 mm x 182 mm x 57 mm
(W x H x D): (9.6 in. x 7.1 in. x 2.1 in.)
Weight : 1.2 kg (2.6 lb)
Connectors: 1 OmniScan connector for phased array probes
Number of focal laws: 256
Probe recognition: Automatic probe recognition
Pulser/Receiver
Aperture : 32 elements
Number of elements: 128 elements
Pulser
Voltage: 45 V or 90 V per element
Pulse width : Adjustable from 30 ns to 500 ns, resolution of 2.5 ns
Pulse shape: Negative square wave
Output impedance: Less than 30 Ω
Receiver
Gain: 0 dB to 74 dB, maximum input signal 1.25 Vp-p
Input impedance: 50 Ω
System bandwidth: 0.53 MHz to 21 MHz (–3 dB)
Beamforming
Scan type: Sectorial and linear
Group quantity: Up to 8
Active elements: 32
Elements: 128
Data Acquisition
Digitizing frequency: 100 MHz (10 bits)
Maximum pulsing rate: Up to 10 kHz (C-scan)
Data Processing
Number of data points: Up to 8,000
Real-time averaging : 2, 4, 8, 16
Rectifier: RF, full wave, halfwave +, halfwave –
Filtering: Low-pass (adjusted to probe frequency), digital filtering (bandwidth, frequency range)
Video filtering: Smoothing (adjusted to probe frequency range)
Data Visualization
A-scan refresh rate: Real time: 60 Hz
Data Synchronization
On internal clock: 1 Hz to 10 kHz
On encoder: On 1 or 2 axes
Programmable Time-Corrected Gain (TCG)
Number of points: 16 (1 TCG curve per channel for focal laws)
Alarms
Number of alarms: 3
Conditions: Any
Analog outputs: 2