TELEMECANIQUE RE1-LC012

توضیحات محصول

Type RE1-LA (On-delay) RE1-LC (Off-delay)
Environment
Conforming to standards IEC 144, 158-1 and 255-5, NF C 20-010, 20-040 and 63-030, VDE 0110 C
and EN 50005
Product certifications CSA, NEMKO, SEMKO, BV NEMKO, BV
Protective treatment “TH” “TH”
Ambient air temperature Operation °C - 25…+ 60 - 25…+ 60
around the device Storage °C - 40…+ 85 - 40…+ 85
Rated insulation voltage (Ui) Conforming to IEC 158-1 and CSA V IEC 158-1 : 250; CSA : 300 IEC 158-1 : 250 ; CSA : 300
Vibration resistance Severity A 55 55
Conforming to NF C 20-616 & IEC 68-2-6 Permissible acceleration 5 gn (60…500 Hz) 5 gn (60…500 Hz)
Shock resistance Severity A 50 50
Conforming to NF C 20-608 Permissible acceleration 50 gn (pulse duration 11 ms) 50 gn (pulse duration 11 ms)
Degree of protection IP 40 IP 40
Maximum operating altitude Without derating m 3000 3000
Operating positions Without derating Any position Any position
Cabl ing Using cable mm2 1 x 0.75 to 2 x 1.5, with or without cable end; captive screw clamps
Using Faston connectors 2 x 2.8 or 2 x 6.35
Using open or closed tags Removable screw clamps
Control circuit characteristics
Supply voltage And permissible variation V c and a 24…240; 0.8…1.1 Un c 24…240; 0.8…1.1 Un
Frequency And permissible variation H z 50/60 ± 20 % 50/60 ± 20 %
Control contact Hard-wired connection only – RE1-LC : connecting cable
to timer £ 10 m
Time delay characteristics
Timing range 0.1…3 s; 1…30 s; 10…300 s; 2…60 min
Setting accuracy 0.1…300 s : £ 10 % of the full scale
2…60 min : £ 15 % of the full scale
Repeat accuracy Conforming to VDE 0435 ± 3 % (0…40 °C) ± 3 % (0…40 °C)
Reset time Range from 0.1…300 s ms 150 (25 after the time delay) 200
during the time delay period Range from 2…60 min ms 650 (25 after the time delay) 1600
Maximum immunity to Range from 0.1…300 s ms 10 (2 after the time delay) 20
micro-breaks during
the time delay period Range from 2…60 min ms 200 (2 after the time delay) 200
Time delay indication By integral LED LED illuminates during the time delay period
Switching characteristics (solid state type)
Maximum continuous current At ambient q : 20 °C A 0.7 (minimum 10 mA) 0.7 (minimum 10 mA)
Maximum short time rating For 10 ms A 15 15
Volt drop, “closed state” V 3 max to 0.7 A 3 max to 0.7 A
Leakage current “open state” mA £ 5 £ 1
Maximum power loss W 2.5 4
Derat ing For temperature > 20 °C mA 5 per °C 5 per °C
Overload protection Conforming to IEC 255-5 3 kV 0.5 joule 3 kV 0.5 joule
In millions of
Electrical durability operating cycles 100 100