| Product characteristics |
|---|
| Output signal | switching signal; analog signal; (configurable) |
| Measuring range | | -0.013...0.25 bar | -13...250 mbar | -5...100 inH2O | -1.3...25 kPa |
|
| Process connection | threaded connection Aseptoflex external thread Aseptoflex |
| Application |
|---|
| System | gold-plated contacts |
| Application | flush mountable for the food and beverage industry |
| Installation | Freely rotatable housing 350° |
| Media | viscous media and liquids with suspended particles; liquids and gases |
| Medium temperature [°C] | -25...80 |
| Min. bursting pressure | | 30000 mbar | 12000 inH2O | 3000 kPa |
|
| Pressure rating | | 6000 mbar | 2400 inH2O | 600 kPa |
|
| Type of pressure | relative pressure |
| No dead space | yes |
| Electrical data |
|---|
| Operating voltage [V] | 20...30 DC |
| Current consumption [mA] | < 60 |
| Min. insulation resistance [MΩ] | 100; (500 V DC) |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time [s] | 0.2 |
| Integrated watchdog | yes |
| Inputs / outputs |
|---|
| Number of inputs and outputs | Number of digital outputs: 2; Number of analog outputs: 1 |
| Outputs |
|---|
| Total number of outputs | 2 |
| Output signal | switching signal; analog signal; (configurable) |
| Electrical design | PNP/NPN |
| Number of digital outputs | 2 |
| Output function | normally open / closed; (configurable) |
| Max. voltage drop switching output DC [V] | 2 |
| Permanent current rating of switching output DC [mA] | 250 |
| Switching frequency DC [Hz] | < 170 |
| Number of analog outputs | 1 |
| Analog current output [mA] | 4...20; (scalable 1:4) |
| Max. load [Ω] | (Ub - 10 V) / 20 mA |
| Analog voltage output [V] | 0...10; (scalable 1:4) |
| Min. load resistance [Ω] | 2000 |
| Short-circuit protection | yes |
| Type of short-circuit protection | yes (non-latching) |
| Overload protection | yes |
| Measuring/setting range |
|---|
| Measuring range | | -0.013...0.25 bar | -13...250 mbar | -5...100 inH2O | -1.3...25 kPa |
|
| Set point SP | | -11...250 mbar | -4.4...100 inH2O | -1.1...25 kPa |
|
| Reset point rP | | -12...249 mbar | -4.8...99.6 inH2O | -1.2...24.9 kPa |
|
| Analog start point | | -13...188 mbar | -5...74.9 inH2O | -1.3...18.8 kPa |
|
| Analog end point | | 50...250 mbar | 20.1...100 inH2O | 5...25 kPa |
|
| In steps of | |
| Factory setting | | SP1 = 63 mbar | rP1 = 58 mbar | | ASP = 0 mbar | AEP = 250 mbar |
|
| Accuracy / deviations |
|---|
| Repeatability [% of the span] | < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1) |
| Characteristics deviation [% of the span] | < ± 0,6; (Turn down 1:1 , linearity, incl. hysteresis and repeatability , limit value setting to DIN EN IEC 62828-1) |
| Linearity deviation [% of the span] | < ± 0,5; (Turn down 1:1) |
| Hysteresis deviation [% of the span] | < ± 0,1; (Turn down 1:1) |
| Long-term stability [% of the span] | < ± 0,1; (Turn down 1:1; per year) |
| Temperature coefficient zero point [% of the span / 10 K] | < ± 0,1; (0...80 °C) |
| Temperature coefficient span [% of the span / 10 K] | < ± 0,4; (0...80 °C) |
| Reaction times |
|---|
| Response time [ms] | < 3 |
| Damping for the switching output dAP [s] | 0...4 |
| Damping for the analog output dAA in steps [s] | 0 - 0,1 - 0,5 - 2 |
| Max. response time analog output [ms] | 3 |
| Software / programming |
|---|
| Parameter setting options | hysteresis / window; normally open / closed; switching logic; current/voltage output; Damping; adaptation of displayed values; display can be rotated and switched off; Display unit; Zero point; span |
| Operating conditions |
|---|
| Ambient temperature [°C] | -25...80 |
| Storage temperature [°C] | -40...100 |
| Protection | IP 67 |
| Tests / approvals |
|---|
| EMC | | EN 61000-4-2 ESD | 4 kV CD / 8 kV AD | | EN 61000-4-3 HF radiated | 10 V/m | | EN 61000-4-4 Burst | 2 kV | | EN 61000-4-6 HF conducted | 10 V |
|
| Shock resistance | | DIN IEC 68-2-27 | 50 g (11 ms) |
|
| Vibration resistance | | DIN IEC 68-2-6 | 20 g (10...2000 Hz) |
|
| MTTF [years] | 182 |
| Mechanical data |
|---|
| Weight [g] | 317 |
| Material | stainless steel (1.4404 / 316L); PBT; PC; PEI; EPDM/X; FKM |
| Materials (wetted parts) | ceramics (99.9 % Al2O3); stainless steel (1.4435 / 316L); surface characteristics: Ra < 0,4 / Rz 4; PTFE |
| Min. pressure cycles | 100 million |
| Process connection | threaded connection Aseptoflex external thread Aseptoflex |
| Displays / operating elements |
|---|
| Display | | Switching status | 2 x LED, red | | Function display | 7-segment LED display | | Measured values | 7-segment LED display |
|
| Display unit | mbar; inH2O; kPa |
| Remarks |
|---|
| Remarks | | The 3-A qualification is only valid if adapters with 3-A qualification are used for installation. |
|
| Pack quantity | 1 pcs. |
| Electrical connection |
|---|
| Connection | Connector: 1 x M12; Contacts: gold-plated |
