| WAN/LAN | - WAN Port: 2 × 10M/100M port (2 × WAN Router) Auto-sensing (RJ45) 802.3/802.3u, Auto MDI/MDIX
- LAN Port: 1 × 10M/100M Auto-sensing (RJ45) 802.3/802.3u, Auto MDI/MDIX
|
| Systems | - CPU: MIPS with 150MHz
- Memory: 2M Bytes Flash, 16M Bytes SDRAM
- Indicators: LAN, WAN1, WAN2
- Reset Switch: Push to load factory default value or back to latest configuration file
- Protocol: TCP/IP, UDP-ARP, BOOTP, ICMP, Routing Protocol, DHCP Server/Client, FTP, TFTP, Telnet, PPPoE
- VPN Pass Through: IPSEC, PPTP
- VoIP Pass Through: Supports H.323 ALG
- Routing Protocol: Static Route, RIP1, RIP2
- Mail Alert: WAN Up, WAN Down, DoS Attack, System Log Full, Support Proxy Server
- System Timer: NTP (Network Timer Protocol), Use PC local time
- DHCP Server/Client: DHCP Server can reserve up to 253 IP, Supports up to 512 users
- WAN IP Convert: WAN port can connect to different IP domain gateway
- Multi-NAT: User definable, Up to 10 different LAN segment IP can be define at LAN port
- Protocol Bandwidth Control: Dynamic allocate bandwidth for specific protocol in each WAN port to avoid link congestion
|
| Inbound/Outbound Load Balance | - Outbound: Session, Weight round robin, Traffic
- Inbound: Session mode
|
| Working Mode | - Router Mode: Work as router with 5 different LAN, PPPoE not supported
- Gateway Mode: All functions enabled
- Basic NAT Mode: All function supported except IP packet filtering and DoS Defense
|
| Security | - DMZ host, Multi NAT/NAPT, PAP/CHAP, Virtual Server Mapping Support
- Internet Access Control, Supports Messenger, Real Audio and Cu-See-Me
- Firewall: DoS (Denial of Service) protection
|
| QoS | - Limit specific application bandwidth and WAN port route path
- Limit specific User Bandwidth and WAN port route path
|
| Management and Configuration | - Firmware Upgrade: HTTP web-based download/TFTP
- Configuration File: Online display configuration, Saves and restores configuration into PC
- Remote Configure: Configure router through internet
- System Data Monitor: Show each WAN port bandwidth usage and traffic status
|
| Virtual Server | - Bi-direction virtual server, Local virtual server pass through
- Support group virtual server setting mode, LAN users can use WAN IP to reach virtual server
|
| Interface and Environmental | - Power: DC 5V/2.8A, 110v - 220v AC Input, External Switching Power Adaptor with full range
- Dimension: 180(W) × 160(D) × 50(H) mm
- Weight: Under 600g
- Operation Temperature: 0°C to 40°C
- Humidity: -10% to 95%
|
