دستگاه استرچ پالت ایتالیایی

Electric control
Two possible modes of operation: manual , in which the operator must press the buttons, or automatic , in which a photocell controls the process automatically
10 different work cycles programmable setting various parameters such as revolutions lower and upper photocell reading delay, number of cycles in sequence,
Programming up to a maximum of 9 cycles in sequence
Adjusting photocell reading delay compared summit pallet
Phase stopping: the machine always stops in the same position
Adjusting velicità rotation turntable by inverter
Film tension adjustment through the clutch / brake mechanical
Automatic check-reel cart with photocell
Command of ascent and descent of the coil controlled by a simple joy-stick
Movement cart-reel through chain closed loop
It is not necessary to bury the car: in fact using the loading chute can be loaded on the pallet machine with a standard pallet truck
To facilitate the movement of the machine are provided inside the base, revenue for the forks of the forklift
Emergency stop button
TECHNICAL FEATURES ECOSPIR ELC / SX
Supply voltage 380 V - 3 Ph - 50 Hz + N
Installed power 1 KW
Overall dimensions DIA x L x H 1500 x 2250 x 2350 mm
Ground clearance 80 mm
Weight 370 kg
Size table 1500 mm
Maximum size bed 1200 x 1200 mm
Maximum height of pallet 2000 mm
Maximum weight bench 1700 kg
Diameter coil 300 mm
Height coil 500 mm
Compressed air No
Spin speed Up to 10 cycles / min