سنسور NCB1,5-8GM25-N0

Inductive sensor NCB1,5-8GM25-N0

• 1.5 mm flush
• Datasheet excerpt: Technical data of NCB1,5-8GM25-N0

  General specifications
  Switching function	Normally closed (NC)
  Output type	NAMUR
  Rated operating distance	1.5 mm
  Installation	flush
  Assured operating distance	0 ... 1.215 mm
  Actual operating distance	1.35 ... 1.65 mm typ.
  Reduction factor rAl	0.3
  Reduction factor rCu	0.2
  Reduction factor r304	0.7
  Nominal ratings
  Nominal voltage	8.2 V (Ri approx. 1 kΩ)
  Switching frequency	0 ... 2000 Hz
  Hysteresis	1 ... 10 typ. 3 %
  Reverse polarity protection	reverse polarity protected
  Short-circuit protection	yes
  Suitable for 2:1 technology	yes , Reverse polarity protection diode not required
  Current consumption
  	Measuring plate not detected	min. 3 mA
  	Measuring plate detected	≤ 1 mA
  Switching state indicator	LED, yellow
  Functional safety related parameters
  MTTFd	3590 a
  Mission Time (TM)	20 a
  Diagnostic Coverage (DC)	0 %
  Compliance with standards and directives
  Standard conformity
  	NAMUR	EN 60947-5-6:2000 IEC 60947-5-6:1999
  Approvals and certificates
  FM approval
  	Control drawing	116-0165
  UL approval	cULus Listed, General Purpose
  CSA approval	cCSAus Listed, General Purpose
  CCC approval	CCC approval / marking not required for products rated ≤36 V
  Ambient conditions
  Ambient temperature	-25 ... 100 °C (-13 ... 212 °F)
  Storage temperature	-40 ... 100 °C (-40 ... 212 °F)
  Mechanical specifications
  Connection type	cable PVC , 2 m
  Core cross-section	0.14 mm2
  Housing material	Stainless steel 1.4305 / AISI 303
  Sensing face	LCP
  Housing diameter	8 mm
  Degree of protection	IP67
  Cable
  	Bending radius	> 10 x cable diameter
  General information
  Use in the hazardous area	see instruction manuals
  	Category	1G; 2G; 3G; 1D