share
چراغ مهتابی اضطراری  ضدانفجار Explosion Proof Emergency Light
  • چراغ مهتابی اضطراری  ضدانفجار Explosion Proof Emergency Light
  • چراغ مهتابی اضطراری  ضدانفجار Explosion Proof Emergency Light
  • چراغ مهتابی اضطراری  ضدانفجار Explosion Proof Emergency Light

چراغ مهتابی اضطراری ضدانفجار Explosion Proof Emergency Light

چراغ مهتابی اضطراری ضدانفجار Explosion Proof Emergency Light

اطلاعات تامین کننده

الکترو سمکاء samka fixing system

تهران

تولید کننده، وارد کننده، عمده فروش، خدمات

تامین تجهیزات، صنایع، نیروگاهی، نفت، گاز، پتروشیمی، صنایع فولاد، ساختمان ، سیمان

مشاهده سایت فروشنده

خرید از تامین کنندگان برتر پارس سنتر!

logo premium

تامین کنندگان برتر پارس سنتر سرعت پاسخگویی بالاتر و محصولات بروز تری نسبت به سایر تامین کنندگان دارند.

مشخصات

چراغ مهتابی اضطراری
Ex Emergency Luminaire eLLK 92 NIB
چراغ مهتابی اضطراری
Ex Emergency Luminaire AB 12NI
چراغ مهتابی اضطراری
Ex Emergency Luminaire eLLM 92 Ni

توضیحات محصول

 
 Ex
Emergency Luminaire eLLK 92 NIB
The new Ex-emergency light
fittings with self-contained battery unit, types eLLK 92… NIB, for bi-pin
fluorescent lamps are fitted with an electronic ballast (EVG).

They meet the requirements of ATEX Directive 94/9/EC. The electronic ballast
EVG 05, according to the newest standard (IEC 60079-7:2006) enables the safe
and economic use of G13 bi-pin lamps acc. to IEC 60081. Lamps are monitored and
safety shut down at the event that the lamp does not strike. Due to a new
charging and monitoring technology with intelligent microelectronics, they
provide reliable safety and reduced maintenance costs. A function test lasting
5 minutes, that is carried out automatically on a weekly basis, even during
mains operation, and a quarterly partial duty-cycle test provide additional
safety and drastically reduce the necessaary amount of manual tests. The
charging and discharging funtions are monitored constantly by the micro-processor
and are indicated via a diode display. Only the spent energy is recharged –
therefore, overcharging is not possible. The so-called memory effect cannot
occur – the service life of the battery is optimized. The need to replace a
battery, a fault in the emergency lighting circuit or a faulty battery is
indicated by the LED display. Due to a new type of battery connection, the
battery can be replaced in the hazardous area. The emergency lighting cycle can
be set locally for 1.5 or 3 hours. A remote switch inquiry is standard.
 

سایر محصولات و خدمات شرکت