سنسور UC500-30GM-IUR2-V15

Ultrasonic sensor UC500-30GM-IUR2-V15

• Parameterization interface for the application-specific adjustment of the sensor setting via the service program ULTRA 3000
• Analog current and voltage output
• Synchronization options
• Adjustable acoustic power and sensitivity
• Temperature compensation

• Product Description
  Single head system

  General specifications
  Sensing range	30 ... 500 mm
  Adjustment range	50 ... 500 mm
  Dead band	0 ... 30 mm
  Standard target plate	100 mm x 100 mm
  Transducer frequency	approx. 380 kHz
  Response delay	21 ms minimum 63 ms factory setting
  Indicators/operating means
  LED green	solid: Power-on flashing: Standby mode or program function object detected
  LED yellow 1	solid: object in evaluation range flashing: program function
  LED yellow 2	solid: object in detection range flashing: program function
  LED red	solid: temperature/program plug not connected flashing: fault or program function object not detected
  Temperature/TEACH-IN connector	Temperature compensation , Evaluation range programming , output function setting
  Electrical specifications
  Operating voltage	10 ... 30 V DC , ripple 10 %SS
  Power consumption	≤ 900 mW
  Interface
  Interface type	RS 232, 9600 Bit/s , no parity, 8 data bits, 1 stop bit
  Input/Output
  Synchronization	bi-directional 0 level -UB...+1 V 1 level: +4 V...+UB input impedance: > 12 KOhm synchronization pulse: ≥ 100 µs, synchronization interpulse period: ≥ 2 ms
  Synchronization frequency
  	Common mode operation	max. 95 Hz
  	Multiplex operation	≤ 95 Hz / n , n = number of sensors , n ≤ 5
  Output
  Output type	1 current output 4 ... 20 mA 1 voltage output 0 ... 10 V
  Resolution	evaluation range [mm]/4000, but ≥ 0.05 mm
  Deviation of the characteristic curve	≤ 0.2 % of full-scale value
  Repeat accuracy	≤ 0.1 % of full-scale value
  Load impedance	current output: ≤ 500 Ohm Voltage output: ≥ 1000 Ohm
  Temperature influence	≤ 2 % from full-scale value (with temperature compensation) ≤ 0.2 %/K (without temperature compensation)
  Approvals and certificates
  UL approval	cULus Listed, General Purpose
  CSA approval	cCSAus Listed, General Purpose
  CCC approval	CCC approval / marking not required for products rated ≤36 V
  Ambient conditions
  Ambient temperature	-25 ... 70 °C (-13 ... 158 °F)
  Storage temperature	-40 ... 85 °C (-40 ... 185 °F)
  Mechanical specifications
  Connection type	Connector M12 x 1 , 5-pin
  Degree of protection	IP65
  Material
  	Housing	stainless steel (1.4305 / AISI 303) PBT plastic parts
  	Transducer	epoxy resin/hollow glass sphere mixture; polyurethane foam
  Mass	170 g