انکودر DFS60B-S1PL10000

انکودر - مارک SICK آلمان مدل DFS60B-S1PL10000 تعداد پالس در هر دور : 10000 قابل برنامه ریزی

تهران اتوماسیون (سنسور، کنترلر، کنترلر حرارت، پرده نوری، تایمر)

تهران

وارد کننده، خرده فروش، خدمات

سنسورهای مجاورتی، سنسورهای نوری، سنسورهای حرارتی، کنترلر حرارت، شمارنده (کانتر)، تایمر

تامین کنندگان برتر پارس سنتر سرعت پاسخگویی بالاتر و محصولات بروز تری نسبت به سایر تامین کنندگان دارند.

ELECTRICAL DATA

Electrical interface	4.5 V ... 32 V, TTL/HTL programmable
Initialisation time after power on	32 ms 1) 30 ms
Connection type	Cable, 8-wire, universal, 3 m
Power consumption max. without load	0.7 W (without load)
Load current max.	≤ 30 mA
Maximum output frequency	600 kHz
Reference signal, number	1
Reference signal, position	90°, electric, logically gated with A and B
Reverse polarity protection	✔
Short-circuit protection of the outputs	✔ 2) 3)
MTTFd: mean time to dangerous failure	300 years (EN ISO 13849-1) 4)

1) With mechanical zero pulse width.
2) Programming TTL with ≥ 5,5 V: short-circuit opposite to another channel or GND permissable for maximum 30 s.
3) Programming HTL or TTL with < 5,5 V: short-circuit opposite to another channel, US or GND permissable for maximum 30 s.
4) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40°C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.

MECHANICAL DATA

Mechanical interface	Solid shaft, Servo flange
Shaft diameter	6 mm x 10 mm
Mass	0.3 kg
Flange material	Aluminum
Housing material	Aluminum die cast
Start up torque	0.5 Ncm (+20 °C)
Operating torque	0.3 Ncm (+20 °C)
Permissible shaft loading radial/axial	80 N (radial) 40 N (axial)
Maximum operating speed	9,000 /min 1)
Moment of inertia of the rotor	6.2 gcm²
Bearing lifetime	3.6 x 10^10 revolutions
Max. angular acceleration	≤ 500,000 rad/s²

1) Self warming of 3.3 K per 1000 revolutions/min when applying note working temperature range.

AMBIENT DATA

EMC	According to EN 61000-6-2 and EN 61000-6-3
Enclosure rating	IP 67, housing side (according to IEC 60529) IP 65, shaft side (according to IEC 60529)
Permissible relative humidity	90 % (condensation of the optical scanning not permitted)
Working temperature range	–40 °C ... +100 °C 1) –30 °C ... +100 °C 2)
Storage temperature range	–40 °C ... +100 °C, without package
Resistance to shocks	70 g (according to EN 60068-2-27)
Resistance to vibration	30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)

Pulses per revolution	10,000 1)
Measuring step	90° / electronically/number of lines
Measuring step deviation at non binary number of lines	± 0.01°
Error limits	± 0.05°