share
Rotary Encodr POSITAL FRABA روتاری انکودر روتاری انکدر قابل برنامه ریزی
  • Rotary Encodr POSITAL FRABA روتاری انکودر روتاری انکدر قابل برنامه ریزی
  • Rotary Encodr POSITAL FRABA روتاری انکودر روتاری انکدر قابل برنامه ریزی

Rotary Encodr POSITAL FRABA روتاری انکودر روتاری انکدر قابل برنامه ریزی

انکودر قابل برنامه ریزی fraba posital بدنه 40MM و شفت 6MM تا 16384 پالس با تغذیه TTL / HTL و خروجی AA' BB' CC' 8WIRES

اطلاعات تامین کننده

مشخصات

شرکت سازنده
Posital Fraba
مدل
UCD-IPH00-XXXXX-02M0-2TW
کشور سازنده
آلمان

توضیحات محصول

Interface Programmable Incremental
Programming Functions PPR (1-16384), Output, Counting Direction
Configuration Tool UBIFAST Configuration Tool (Version ≥ 1.6.3)
Outputs
Output Driver Push-Pull (HTL)
Quadrature Phasing 90° ± 4.5° electrical
Output Voltage High Level Push-Pull (HTL) > 4 V @ 4.75-9 V Supply Voltage
> V-3 V @ 9-30 V Supply Voltage
Output Voltage Low Level Push-Pull (HTL) < 0.5 V
Output Voltage High Level RS422 (TTL) > 4 V
Output Voltage Low Level RS422 (TTL) < 0.5 V
Maximum Frequency Response 1 MHz
Maximum Switching Current 50 mA per Channel
Electrical Data
Supply Voltage 4.75 – 30 VDC
Current Consumption ≤140mA @ 5V DC, ≤70mA @ 10V DC, ≤40mA @ 24V DC
Power Consumption ≤ 1.0 W
Start-Up Time < 250 ms
Min. Load Resistance 120 Ω
Reverse Polarity Protection Yes
Short Circuit Protection Yes
EMC: Emitted Interference DIN EN 61000-6-4
EMC: Noise Immunity DIN EN 61000-6-2
MTTF 280 years @ 40 °C
Sensor
Technology Magnetic
Accuracy (INL) ±0.0878° (≤ 12 bit)
Duty Cycle 180° ± 27° (Speed > 100RPM)
Phase Angle 90° ± 14° (Speed > 100RPM)
Environmental Specifications
Protection Class (Shaft) IP65
Protection Class (Housing) IP65
Operating Temperature -20 °C (-4 °F) - +80 °C (+176 °F)
Humidity 98% RH, no condensation
Mechanical Data
Mechanical Data
Housing Material Steel
Housing Coating Zinc Plated
Flange Type Clamp, ø 40 mm
Flange Material Aluminum
Shaft Type Solid, Single Flat, Length = 15 mm
Shaft Diameter ø 6 mm (0.24")
Shaft Material Stainless Steel V2A (1.4305, 303)
Max. Shaft Load Axial 40 N, Radial 110 N
Rotor Inertia ≤ 30 gcm² [≤ 0.17 oz-in²]
Friction Torque ≤ 3 Ncm @ 20 °C (4.2 oz-in @ 68 °F)
Max. Permissible Mechanical Speed ≤ 12000 1/min
Shock Resistance ≤ 100 g (half sine 6 ms, EN 60068-2-27)
Permanent Shock Resistance ≤ 10 g (half sine 16 ms, EN 60068-2-29)
Vibration Resistance ≤ 10 g (10 Hz – 1000 Hz, EN 60068-2-6)
Length 33 mm (1.30")
Weight 480 g (1.06 lb)
Minimum Mechanical Lifetime
(10^8 revolutions with Fa/Fr)
430 (20 N / 40 N), 150 (40 N / 60 N), 100 (40 N / 80 N), 55 (40 N / 110 N)
Electrical Connection
Connection Orientation Axial/Radial
Cable Length 2 m [79"]
Wire Cross Section 0.14 mm² / AWG 26
Material / Type PVC
Cable Diameter 6 mm (0.24 in)
Minimum Bend Radius 46 mm (1.81") fixed, 61 mm (2.4") flexing
Certification
Approval CE + cULus listed, Industrial Control Equipment

سایر خدمات شرکت