سنسور نوری OMRON E3S-AT61-D

Sensing distance 7 m

Standard sensing object Opaque:
10-mm dia. min.

Directional angle Both Emitter and
Receiver: 3° to 15°

Light source (wavelength) Red LED (700 nm)

Power supply voltage 10 to 30 VDC, including ripple (p-p) 10%

Current consumption Both Emitter and Receiver: 20 mA max. (plus approx. 15 mA with turbo function)

Control output Load power supply voltage: 30 VDC max., Load current: 100 mA max. (residual voltage: 1 V max.)
Open-collector output (NPN or PNP depending on model), Light-ON/Dark-ON selectable

Self-diagnostic output (Only
on Sensors with self-diagnostic
outputs)
(Only Sensors with self-diagnostic function) Load power supply voltage: 30 VDC max.,
Load current: 50 mA max. (residual voltage: 1 V max.),
Open-collector output (NPN or PNP depending on model)

Input
voltage
NPN
with Emitter OFF: 0 V short-circuit or 1.5 V max.
(source current: 1 mA max.)
with Emitter ON: Open
(leakage current: 0.1 mA max.)
PNP
with Emitter OFF: +DC short-circuit or −1.5 VDC
max. (sink current: 3 mA max.)
with Emitter ON: Open
(leakage current: 0.1 mA max.)
---
Response
time 0.5 ms max.
Protection circuits
Power supply reverse
polarity protection,
Output short-circuit
protection

Response time Operation or reset: 0.5 ms max.
Sensitivity adjustment Two-turn endless adjuster with an indicator
Timer function (Only on Sensors
with the timer function) 0 to 100 ms OFF-delay variable adjuster
Turbo function (Only on Sensors
with the turbo function) Yes (with turbo switch) ---
Ambient illumination (Receiver
side)
Incandescent lamp: 5,000 lx max.
Sunlight: 10,000 lx max.
Ambient temperature Operating: −25°C to 55°C (with no icing or condensation)
Storage: −40°C to 70°C (with no icing or condensation)
Ambient humidity Operating: 35% to 85% (with no condensation)
Storage: 35% to 95% (with no condensation)
Insulation resistance 20 MΩ min. at 500 VDC between current-carrying parts and case
Dielectric strength 1,000 VAC, 50/60 Hz for 1 min. between current-carrying parts and case
Vibration resistance
(destruction) 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance
(destruction) Destruction: 500m/s2, 3 times each in X, Y, and Z directions
Degree of protection IEC IP67; NEMA: 4X (indoors only) *2
Connection method Pre-wired (standard length: 2 m) or M12 connector
Weight (packed state)
Pre-wired cable:
Approx. 150 g
Connector: Approx. 70 g