بریر KFD2-STC5-EX1

SMART Transmitter Power Supply KFD2-STC5-EX1 بریر آنالوگ KFD2-STC5-EX1 PEPPERL+FUCHS KFD2-STC5-EX1 هارمونیک کنترل نمایندگی فروش محصولات شرکت پپرل فوکس در ایران

قیمت

قیت همکار / عمده فروشی :: استعلام قیمت

close

اطلاعات تامین کننده

هارمونیک کنترل نمایندگی PEPPERL+FUCHS ایران

تهران

وارد کننده، عمده فروش، خرده فروش، خدمات

نمایندگی PEPPERL+FUCHS، نمایندگی MTL، بریر پپرل فوکس، نمایندگی ACREL، بریر MTL، نمایندگی NOVUS، سنسور پپرل فوکس، بریر pepperl+fuchs، نماینده رسمی شرکت PEPPERL+FUCHS، سنسور pepperl+fuchs، نمایندگی IFM، رله PEPPERL+FUCHS، فروش بریر PEPPERL+FUCHS، فروش سنسور پپرل فوکس، نمایندگی پپرل فوکس، نمایندگی SICK

مشاهده سایت فروشنده

تماس با تامین کننده

ثبت درخواست خرید

مشخصات

شرکت سازنده: PEPPERL+FUCHS
مدل: KFD2-STC5-EX1
کشور سازنده: سنگاپور
خروجی: آنالوگ 20-0/4 میلی آمپر SINK/SOURCE
ورودی: ترانسمیتر 2 و 3 سیم یا منبع جریان دو سیم
ولتاژ تغذیه: 18-30 ولت DC

توضیحات محصول

SMART Transmitter Power Supply KFD2-STC5-Ex1

1-channel isolated barrier
24 V DC supply (Power Rail)
Input 2-wire and 3-wire SMART transmitters and 2-wire SMART current sources
Output 0/4 mA ... 20 mA current sink/current source
Terminals with test points
Up to SIL 2 acc. to IEC 61508

General specifications
Signal type	Analog input
Functional safety related parameters
Safety Integrity Level (SIL)	SIL 2
Supply
Connection	Power Rail or terminals 14+, 15-
Rated voltage	18 ... 30 V DC
Ripple	within the supply tolerance
Power dissipation	≤ 1 W at maximum load
Power consumption	≤ 1.6 W at maximum load
Input
Connection side	field side
Connection	terminals 1+, 2-, 3
Input signal	0/4 ... 20 mA
Open circuit voltage/short-circuit current	terminals 1+, 3: 23 V / 25 mA
Input resistance	max. 265 Ω terminals 2-, 3 , max. 330 Ω terminals 1+, 3
Available voltage	≥ 16 V at 20 mA ; ≥ 20 V at 4 mA , terminals 1+, 3
Output
Connection side	control side
Connection	terminals 7+, 8-, 9- (sink) terminals 7-, 8+, 9+ (source) see additional information
Load	0 ... 800 Ω
Output signal	0/4 ... 20 mA (overload > 25 mA)
Ripple	max. 50 µA rms
External supply (loop)	2 ... 30 V DC
Transfer characteristics
Deviation	at 20 °C (68 °F), 0/4 ... 20 mA ≤ 10 µA incl. calibration, linearity, hysteresis, loads and fluctuations of supply voltage
	Influence of ambient temperature	≤ 0.25 µA/K
Frequency range	field side into the control side: bandwidth with 0.5 Vpp signal 0 ... 7.5 kHz (-3 dB) control side into the field side: bandwidth with 0.5 Vpp signal 0.3 ... 7.5 kHz (-3 dB)
Settling time	200 µs
Rise time/fall time	100 µs
Galvanic isolation
Output/power supply	functional insulation, rated insulation voltage 50 V AC
Indicators/settings
Display elements	LED
Labeling	space for labeling at the front
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility	NE 21:2012 EN 61326-3-2:2008
Degree of protection	IEC 60529:2001
Protection against electrical shock	UL 61010-1:2012
Ambient conditions
Ambient temperature	-20 ... 70 °C (-4 ... 158 °F)
Mechanical specifications
Degree of protection	IP20
Connection	screw terminals
Mass	approx. 150 g
Dimensions	20 x 124 x 115 mm (0.8 x 4.9 x 4.5 inch) , housing type B2
Mounting	on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EU-type examination certificate	CML 17 ATEX 2029X
	Marking	II (1)G [Ex ia Ga] IIC II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I
	Input	[Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I
Supply
	Maximum safe voltage	250 V (Attention! The rated voltage can be lower.)
Equipment	terminals 1+, 3-
	Voltage Uo	26.2 V
	Voltage Uq	27.25 V
	Current Io	93 mA
	Power Po	634 mW
Equipment	terminals 2-, 3
	Voltage Ui	30 V
	Current Ii	115 mA
	Power Pi	max 1 W
	Voltage Uo	2 V
	Current Io	8.5 mA
	Power Po	4.3 mW
Equipment	terminals 1+, 2 / 3-
	Voltage Uo	26.2 V
	Voltage Uq	27.25 V
	Current Io	115 mA
	Power Po	784 mW
Certificate	CML 17 ATEX 3028X
	Marking	II 3G Ex ec IIC T4 Gc
Galvanic isolation
	Input/Output	safe electrical isolation acc. to IEC/EN 60079-11:2007, voltage peak value 375 V
	Input/power supply	safe electrical isolation acc. to IEC/EN 60079-11:2007, voltage peak value 375 V
Directive conformity
	Directive 2014/34/EU	EN IEC 60079-0:2018 , EN 60079-7:2015+A1:2018 , EN 60079-11:2012
International approvals
UL approval	E106378
	Control drawing	116-0439 (cULus)
IECEx approval
	IECEx certificate	IECEx CML 17.0015X
	IECEx marking	[Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I , Ex ec IIC T4 Gc
General information
Supplementary information	Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.