سنسور لیزری IFM O5D100

هارمونیک کنترل نماینده فروش IFM

هارمونیک کنترل فروش سنسور IFM O5D100

هارمونیک کنترل فروش سنسور نوری IFM O5D100

هارمونیک کنترل سنسور لیزری IFM O5D100

O5DLCPKG/US

• Very long range due to time-of-flight measurement
• Reliable background suppression and colour-independent detection
• With display and pushbuttons for precise switch point setting
• Oblique angle to the object possible
• Reliable detection of glossy surfaces

• Product characteristics
  Type of light	red light
  Measuring range [m]	0.03...2
  Communication interface	IO-Link
  Laser protection class	2
  Housing	rectangular
  Dimensions [mm]	56 x 18.2 x 46.8
  Application
  Special feature	Background suppression
  Electrical data
  Operating voltage [V]	10...30 DC; ("supply class 2" to cULus)
  Current consumption [mA]	75; (24 V)
  Protection class	III
  Reverse polarity protection	yes
  Type of light	red light
  Wave length [nm]	650
  Typ. lifetime [h]	50000
  Inputs / outputs
  Number of inputs and outputs	Number of digital outputs: 2
  Outputs
  Total number of outputs	2
  Electrical design	PNP
  Number of digital outputs	2
  Output function	normally open / normally closed; (complementary)
  Max. current load per output [mA]	100
  Switching frequency DC [Hz]	11
  Short-circuit protection	yes
  Type of short-circuit protection	pulsed
  Overload protection	yes
  Detection zone
  Max. light spot diameter [mm]	5
  Light spot dimensions refer to	2 m
  Detection range hysteresis [%]	< 2.5
  Note on monitoring range hysteresis	black 6% remission
  Background suppression available	yes
  Background suppression [m]	< 20
  Measuring/setting range
  Measuring range [m]	0.03...2
  Sampling rate [Hz]	33
  Interfaces
  Communication interface	IO-Link
  Transmission type	COM2 (38,4 kBaud)
  IO-Link revision	1.1
  SDCI standard	IEC 61131-9
  Profiles	Smart Sensor: Sensor Identification; Binary Data Channel; Process Value; Sensor Diagnosis
  SIO mode	yes
  Process data analogue	1
  Process data binary	1
  Min. process cycle time [ms]	6.6
  Supported DeviceIDs	Type of operation DeviceID Default 372
  Operating conditions
  Ambient temperature [°C]	-25...60
  Note on ambient temperature	at ta < -10 °C warm-up is necessary, laser is off
  Protection	IP 65; IP 67
  Max. immunity to extraneous light [klx]	10; (on the object)
  Tests / approvals
  EMC	EN 60947-5-2
  Laser protection class	2
  Notes on laser protection	Caution: laser light Power: <= 4,0 mW Wave length: 650 nm pulse: 1,3 ns Do not stare into beam. Avoid exposure to the laser light. laser class: 2 EN / IEC60825-1:2007 EN / IEC60825-1:2014 Complies with 21 CFR 1040 except for deviations pursuant to Laser Notice No. 50, dated June 2007.
  MTTF [years]	151
  Mechanical data
  Weight [g]	85.5
  Housing	rectangular
  Dimensions [mm]	56 x 18.2 x 46.8
  Materials	housing: PA; bezel: stainless steel; operator interface: TPU; lens: PMMA
  Lens alignment	side lens
  Displays / operating elements
  Display	switching status LED, yellow switching output PIN 4 operation LED, green display alphanumeric display, 3-digit
  Display unit	cm
  Remarks
  Pack quantity	1 pcs.
  Electrical connection
  Connection	Connector: 1 x M12
  Diagrams and graphs
  hysteresis graph	x: distance [mm] y: Hysteresis [mm] 1 = background black 6% remission 2 = background white 90% remission
  Other data
  Accuracy
  Accuracy distance black (6 % remission) white (90 % remission) 0 mm ± 15 mm ± 15 mm 500 mm ± 15 mm ± 15 mm 1000 mm ± 15 mm ± 15 mm 1500 mm ± 20 mm ± 20 mm 2000 mm ± 30 mm ± 20 mm
  Extraneous light on the object < 10 klx
  ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — O5D100-04 — 25.02.2016 —