نوار چسب اسکاچ +33
Scotch® Super 33+™ Vinyl Electrical Tape
اطلاعات تامین کننده
الکترو سمکاء samka fixing system
تهرانتولید کننده، وارد کننده، عمده فروش، خدمات
تامین تجهیزات، صنایع، نیروگاهی، نفت، گاز، پتروشیمی، صنایع فولاد، ساختمان ، سیمان
مشاهده سایت فروشندهخرید از تامین کنندگان برتر پارس سنتر!
تامین کنندگان برتر پارس سنتر سرعت پاسخگویی بالاتر و محصولات بروز تری نسبت به سایر تامین کنندگان دارند.
مشخصات
- شرکت سازنده
- 3m
- مدل
- Scotch® Super 33+™ Vinyl Electrical Tape
- کشور سازنده
- ایالات متحده آمریكا
- نوار چسب اسکاچ +33
- Scotch® Super 33+™ Vinyl Electrical Tape
توضیحات محصول
Scotch® Super 33+™ Vinyl Electrical Tape
Data Sheet June 2022
Product Description Scotch® Super 33+™ Vinyl Electrical Tape is a black, professional grade, nominal 7-mil (0.178 mm)
thick electrical insulating tape composed of an elastic vinyl (PVC) film backing coated on one side
with a non-corrosive, rubber-based pressure-sensitive adhesive.
Commonly used in these types of applications:
UL510: As primary insulation on applications up to 600V at max temperature of 80°C (176°F)
and min temperature of -10°C (14°F) on joints and splices in wires and cables in accordance
with NFPA 70, National Electrical Code
CSA C22.2 No.197: As primary insulation on applications up to 1000V at max temperature of
105°C (221°F) and min temperature of -18°C (0°F) on joints and splices in wires and cables in
accordance with Canadian Electrical Code, Part 1
IEC 60454-3-1: Classification Type 7, Designation IEC 60454-3-1-7/F-PVCP/90 for thermal
index of 90°C (194°F) and min temperature rating of -18°C (0°F)
Industrial, Commercial and Residential environments
Where Flame Retardant and Sunlight, Cold Resistance rating is required – UL510
Cable jacket repair (up to 600V (UL) / 1000V (CSA) as Primary Insulation) and as mechanical
protection when overwrapping rubber splicing, and mastic tapes used on LV/MV/HV joints
and splices
Critical indoor and outdoor operations as determined by end-user where use of a general use
vinyl electrical tape is not recommended
Where compatibility with most solid dielectric cable insulations, rubber and synthetic splicing
compounds is required
Where reducing moisture ingress is needed, best results achieved when used as an overwrap
in combination with a rubber splicing or mastic tape product
For harnessing and bundling of wires and cable where minimum bulk is required
Country of Origin: USA