سنسور دمای فضای باز Thermokon مدل AGS54+

The devices are constructed for the operation of protective low voltage
(SELV). For the electrical connection, the technical data of the
corresponding device arevalid.
Specially with regard to passive sensors (e.g. PT100 etc.) in 2-wire
conductor versions, the wire resistance of the supply wire has to be
considered. Probably, the same has to be compensated by the following
electronics.
Due to the self-heating, the wire current affects the accuracy of the
measurement. Thus, the same should not exceed1mA.
Sensing devices with transducers should in principle be operated in the
middle of the measuring range to avoid deviations at the measuring end
points. The ambient temperature of the transducer electronics should be
kept constant.The transducers must be operated at a constant supply
voltage.
The adjustment of the measuring ranges is made by changing the bonding
jumpers (see terminal connection diagram). The output value in the new
measuring range is available after approx. 2 seconds