ایزولاتور بریر ورودی دیجیتال GMI - D5030D DI Switch Proximity

General Description:
The single and dual channel Switch/Proximity Detector Repeater Barrier, D5030S and D5030D
module is a unit suitable for applications requiring SIL 3 level (according to IEC
61508:2010 Ed. 2) in safety related systems for high risk industries.
The unit can be configured for switch or proximity detector (EN60947-5-6, NAMUR),
NO or NC and for NE or ND SPST (D5030D) or SPDT (D5030S) relay output contact.
Each channel enables a Safe Area load to be controlled by a switch, or a proximity
detector, located in Hazardous Area. It's Hart Compatible This Model can be used as duplicator.
Fault detection circuit (DIP switch configurable) is available for both proximity sensor
and switch equipped with end of line resistors. In case of fault, when enabled
it de-energizes the corresponding output relay and turns the fault LED on;
when disabled the corresponding output relay repeats the input line open or
closed status as configured.
D5030D is programmable via dip switches as single input and two independent outputs.
Out 2 can be programmed for output duplicating Out 1 or Fault detection Out.
In case of duplication, relay actuation can be independently configured for each output.
In case of fault output, relay actuation can be programmed as normally energized or
normally de-energized.
Mounting on standard DIN-Rail, with or without Power Bus,
in Safe Area / Non Hazardous Location or in Zone 2 / Class I, Division 2 or Class I, Zone 2.