درایو-اینورتر-کنترل دور- (Danfoss-FC300-Automation Drive (1.1~1.4MW

Range
0.25 - 37 kW (200 - 240 V)
0.37 - 800 kW (380 - 500 V)
0.75 - 75 KW (525 - 600V)
11 kW – 1.4 MW (525 - 690V)

Enclosures
The drive meets requirements for enclosure class IP 20/Chassis. Optional IP21/NEMA 1, IP55/NEMA 12, IP 54/NEMA12 or IP66 NEMA 4X.

Smart logic controller
The VLT® AutomationDrive features logic control functions and a sequence control based on events and actions.

Safety
The VLT® AutomationDrive comes standard with the safe stop functionality suitable for category 3 installations according to EN 954-1. This feature prevents the drive from starting unintended.

Hot pluggable LCP
The Local Control Panel (LCP) can be plugged in or out during operation. Settings are easily transferred via the control panel from one drive to another or from a PC with set-up software

Intelligent heat management
Cooling can take place in two ways to offer different sets of benefits. Forced convection cooling: A fan blows cold air through the cooling ribs of the aluminium base to remove heat. The channel is easily cleaned without touching electronics. Cold plate cooling: External cooling is possible through the back side of the aluminium base. Panel through mounting: Electronics inside cabinet - power heat sink outside cabinet. Duct cooling: Air from the control room – or from outside – cools the heat sink without contact to the electronics.

Accessories
For the VLT® AutomationDrive FC 302 a wide selection of accessories is available to suit your needs. For further details see Operation Instruction.

Options
Options for bus communication, synchronisation, user programs, etc., are delivered ready to plug-and-play.

Display options
Graphical Local Control Panel(LCP 102)
Numerical Local Control Panel (LCP 101)
LCP Panel Mounting Kit
Blind Cover

Application option
24V input option for control voltage.

Fieldbus options
PROFIBUS DP V1 (MCA 101)
DeviceNet (MCA 104)
CAN Open (MCA 105)
PROFINET (MCA 120)
EtherNet IP (MCA 121)
Modbus TCP (MCA 122)

.