یو پی اس APC® SURT10000XLT Tower/Rack Mountable 10 kVA

APC Smart-UPS RT belongs to a family of high-density, performance UPSs for voice and data networks, medical labs, and light industrial applications.

• Input voltage: 208 VAC nominal, 160 – 280 VAC mains operation
• Output voltage: 208 VAC nominal +/- 3% ( 50/60 Hz )
• Power capacity: 10 kVA
• Plug/connector type: Hard wire 3 wire 2PH + G, receptacles: 1 x hard wire 3 wire 2PH + G – backup/surge protected, 2 x NEMA L6 30R, 2 x NEMA L6 20R – backup/surge protected
• Battery information: Spill proof, maintenance free sealed lead acid user replaceable hot swappable, Backup/run time: 0.11 Hour 6.40 kW full load, 0.30 Hour 3.20 kW half load, Battery recharge time: 2.20 Hour typical
• Form factor: Tower
• Interface/ports: DB 9 RS 232, RJ 45 10/100 Base T, smart slot
• Color: Black
• Filtering: Full time multi pole noise filtering, 0.3% IEEE surge let through, zero clamping response time
• Waveform type: Sine wave
• Modules: 4 x battery module
• Bypass switch: Automatic and manual
• Control panel: LED status display with load and battery bar graphs and on line, on battery, replace battery, overload and bypass indicators, Audible alarm: Alarm when on battery, distinctive low battery alarm, overload continuous tone alarm
• Efficiency at full load: 92.5%, crest factor: 3:1, network management: SNMP manageable included
• Operating temperature: 0 – 40 deg C, – 15 – 45 deg C(storage), humidity: 0 – 95%(operating and storage), altitude: 0 – 10000 ft, 0 – 50000 ft(storage), thermal dissipation: 1739.00 BTU/hr
• Automatically starts up the connected equipment upon the return of utility power, enables centralized management via the APC InfraStruXure manager, install maintenance releases of firmware remotely using FTP
• Certifications and standards: CSA, FCC part 15 class A, UL 1778
• Includes: Smart UPS RT 10kVA tower UPS, CD with software, smart UPS signalling RS 232 cable, user manual, service manual, web/SNMP management card
• Weight: 244 lbs.
• Warranty: 2 years limited