سنسور UC500-30GM-IUEP-IO-V15
سنسور اولتراسونیک UC500-30GM-IUEP-IO-V15 با قابلیت رنج اندازه گیری از 30 میلیمتر الی 500 میلیمتر دارای خروجیهای آنالوگ 20-4 میلی آمپر،10-0 ولت DC و سوییچ PUSH-PULL میباشد.این سنسور دارای رزولوشن 0.15 میلیمتر است و از مزایای آن تنظیمات بسیار راحت از طریق کلیدهای TEACH روی بدنه سنسور میباشد.بدنه سنسور از Stainless steel 1.4305 / AISI 303 ساخته شده.
مشخصات
- شرکت سازنده :
- PEPPERL+FUCHS
- مدل :
- UC500-30GM-IUEP-IO-V15
- کشور سازنده :
- آلمان
قیمت محصول
- قیت همکار / عمده فروشی :
- استعلام قیمت
- حداقل مقدار سفارش :
- 1 عدد
فایلهای پیوست
191238_eng | 531٫1 کیلوبایت | دانلود |
توضیحات محصول
Ultrasonic sensor UC500-30GM-IUEP-IO-V15
- IO-link interface for service and process data
- Programmable via DTM with PACTWARE
- Switch output and analog output
- Selectable sound lobe width
- Synchronization options
- Temperature compensation
- Datasheet excerpt: Technical data of UC500-30GM-IUEP-IO-V15
Product Description Single head system General specifications Sensing range 30 ... 500 mm Adjustment range 50 ... 500 mm Dead band 0 ... 30 mm Standard target plate 100 mm x 100 mm Transducer frequency approx. 380 kHz Response delay minimum : 25 ms
Ex works settings: 45 msIndicators/operating means LED green solid: Power on
flashing: Standby mode or IO link communicationLED yellow 1 solid: Object in evaluation range
flashing: Learning function, object detectedLED yellow 2 solid: Object in evaluation range
flashing: Learning function, object detectedLED red solid red: Error
red, flashing: program function, object not detectedElectrical specifications Operating voltage 10 ... 30 V DC , ripple 10 %SS
15 ... 30 V voltage outputNo-load supply current ≤ 60 mA Power consumption ≤ 1 W Interface Interface type IO-Link Protocol IO-Link V1.0 Transfer rate Acyclical: typical 240 Bit/s Cycle time min. 13.2 ms Process data witdh 16 bit Input/Output Input/output type 1 synchronization connection, bidirectional 0 Level 0 ... 1 V 1 Level 4 V ... UB Input impedance > 12 kΩ Output rated operating current < 12 mA Pulse length 0.5 ... 300 ms (level 1) Pulse interval ≥ 14 ms (level 0) Synchronization frequency Common mode operation ≤ 70 Hz Multiplex operation ≤ 90 Hz / n , n = number of sensors , n ≤ 10
(factory setting: n = 5 )Output Output type 1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected
Current output 4 mA ... 20 mA or
voltage output 0 V ... 10 V configurableRated operating current 200 mA , short-circuit/overload protected Voltage drop ≤ 2.5 V Resolution current output: evaluation range [mm]/3200 but ≥0.05 mm
voltage output: evaluation range [mm]/4000 but ≥0.05 mmDeviation of the characteristic curve ≤ 0.2 % of full-scale value Repeat accuracy ≤ 0.1 % of full-scale value Switching frequency ≤ 11 Hz Range hysteresis 1 % of the adjusted operating range (default settings), programmable Load impedance current output: ≤ 300 Ohm
Voltage output: ≥ 1000 OhmTemperature influence ≤ 1.5 % from full-scale value (with temperature compensation)
≤ 0.2 %/K (without temperature compensation)Approvals and certificates UL approval cULus Listed, General Purpose CSA approval cCSAus Listed, General Purpose CCC approval CCC approval / marking not required for products rated ≤36 V Ambient conditions Ambient temperature -25 ... 70 °C (-13 ... 158 °F) Storage temperature -40 ... 85 °C (-40 ... 185 °F) Mechanical specifications Connection type Connector M12 x 1 , 5-pin Degree of protection IP67 Material Housing Stainless steel 1.4305 / AISI 303
TPU
PolyamidesTransducer epoxy resin/hollow glass sphere mixture; polyurethane foam Mass 66 g