دستگاه کنترل کننده تنش ZXTEC مدل ZXT-B

1. Install tension detector: Customer can install a tension detector by level,
 perpendicularity or side on the basis of own demand.
Notice: Tension detector disallows hard gearing with the article and should
 use universal pedestal to install transition as far as possible. Screw installed
 shouldn’t longer than the fixed plank of the tension detector; The
 perpendicular gearing tension detector should notice the fulcrum of it with
 an upward exposure namely fuse with an upward exposure. On the sides
 installing the setting bolt that the tension detector should notice is not too
 long, otherwise it will cause the detector permanence damage.
2. Install tension detector: According to the item of wiring diagram and connect
 the input, output and power lead of the controller correspond.
Notice: The power lead of the tension controller should try to be far away from
 the source of the disturbance such as the button, AC electromagnetic contactor
 and so on